Playinga Tape - RCA VR349 User Manual

Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen. Then press the other
two numbers.
POWER Turns the TV on and off.
SLOW + and - Used with some TV menus to select and adjust
features.
VOL Up and Down Raises and lowers sound of TV.
PLAYING A TAPE
1. Tune the TV to your VCR viewing channel
(3, 4, or TV's video input).
2. Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
Press FWD or REV to position the tape.
Press PLAY (if necessary) to begin tape play.
Press PAUSE for stop action.
PressTRACKING up or down to remove any streaks from the
picture, if necessary.
Press STOP to stop playback.
Pause
playing back a tape recorded on
22