Table of Contents
Advertisement
FRONT
PANEL
BRIGHTNESS
You can change the brightness
level of the fluorescent
display
panel on the front of the VCR. In the PREFERENCESmenu, press 4
to switch between the options.
•
AUTO brightens
the display when the VCR is on and dims the
display when the VCR is off.
•
BRIGHT keeps the display bright when the VCR is on or off.
•
DIM keeps the display at a low brightness
level at all times.
PREFERRED
TAPE SPEED
You can set the preferred
tape speed between
Standard Play (SP)
and Super Long Play (SLP). In the PREFERENCESmenu, press 5 to
switch between the options.
•
SP sets the preferred
recording
speed to SR
•
SLP sets the preferred
recording
speed to SLR
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work best when
you play back tapes recorded in
this speed.
SLP(Super Long Play)
Gives approximately
three times the
recording time of tapes recorded in
SR Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
Approximate
Recording
Times:
Cassette
SP
SLP
T-120
2 Hr
6 Hr
T-160
2 Hr/40 Min
8 Hr
20
Advertisement
Table of Contents
