Table of Contents
Advertisement
AUTOMATIC
REWIND
The VCR automatically
rewinds a tape if it reaches the end
of the tape during
playback. While rewinding,
you can press
the POWER button on the remote and the VCR will turn off
after rewinding.
TAPE EJECT
Press STOP, EJECTon the VCR (STOP on the remote) when a
tape is stopped to eject it. A tape can be ejected even when the
VCR is turned
off.
RECORDING
If you want to record something
that you're watching,
you can
use basic recording
methods:
1.
Set the tape speed by pressing the SPEED button
on the
remote to change between SP and SLP
2.
Press the RECORD button
(REC on the remote) to begin
recording
3.
Press STOP to stop recording.
If you just want to pause the recording
for a short time
(such as during a commercial),
press PAUSE instead of STOR
To resume recording
again, press either PAUSE or REC.
CHECK THE SAFETY TAB
No matter how you record, you need to make sure there is a
tape in the VCR, and that the safety tab on the tape is not
removed. You cannot record on a tape whose safety tab is
missing.
If the safety tab is removed and you want to record over it,
simply cover the space with vinyl tape.
Safety Tab
24
Advertisement
Table of Contents
