TROUBLESHOOTING
TIPS
No power
•
Check to make sure it is plugged
into an operating
outlet.
•
Check to make sure your connections
are correct.
VCR does not respond
to remote
•
Check to make sure there are no objects between
the VCR and
remote.
•
The batteries may need changing.
•
Make sure the Remote VCR1/VCR2 setting
is set to VCR1 so the
remote that came packed with your VCR can operate
it.
Poor or no picture for normal TV viewing
•
Check to make sure the VCR indicator
is off.
•
Check to make sure the TV is switched
to an active channel.
•
Check to make sure the antenna connections
are secure and correct.
Snowy or no picture during
playback
•
Press TV.VCR to turn VCR indicator
on.
•
Check TV channel selected (3 or 4) to make sure it matches the
channel selected with 3 CH. 4 switch on
back of VCR.
•
Check to make sure the TV's fine tuning
is correct for the channel
you have selected.
•
Check video cable connections
between
VCR and TV monitor.
•
Check to make sure the TV monitor
is set to video input
(see page 62 for more information).
•
Try another
tape.
•
Some snow/streaks
are normal during
search, stop action, frame
advance, and slow-motion
playback.
Streaks in picture during
normal
playback
•
Press one of the TRACKING buttons to move streaks up or down for
the best picture.
•
Check to make sure the tape is of good quality
and not worn out.
55