Commercial Advance - RCA VR639 User Manual

QUESTIONS AND ANSWERS ABOUT COMMERCIAL,,ADVANCE
Will commercials be scanned through only on playback of recordings?
Yes. The VCR does not rewind and mark commercial segments until after recording is finished.
How fast does the COMMERCIAL,I_ADVANCE VCR scan through the commercial breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12 seconds. In SP,it
takes about
25-35 seconds.
Are commercials still recorded if I want to watch them?
Yes. The recorded program, including commercials, can be viewed by setting the Playback feature to
MANUAL.
What if the VCR scans forward through part of my program?
Simply rewind the tape to just before the skipped segment, and press PLAY to view the program.
Once a recording has been marked, does COMMERCIALI_I_ADVANCE work each time the tape is played?
Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each time the tape is
played in a COMMERCIALI_I_ADVANCE VCR.
After marking commercials, is the tape left at the beginning or end of the recording?
The tape is left at the end of the recording so it is in position to begin additional programmed recordings.
Does the marking process interfere with other programmed recordings?
No. If two or more recordings are programmed together without sufficient time to mark the first recording,
marking will take place after all recordings have completed.
What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume again when the VCR's power is
turned off as long
as the tape has not been ejected from the VCR.
Does COMMERCIALI_I_ADVANCE work in all recording speeds?
Yes, COMMERCIALI_I_ADVANCE works in SP and SLP.
Will COMMERCIALbI_ADVANCE marked recordings work in
non-Commercial Advance VCRs?
A COMMERCIALI_I_ADVANCE marked recording will play in a non-commercial advance VCR, but
commercials will not automatically be skipped.
60