Pip (Picture-In-Picture) Operation - RCA P46920 User Manual

PI P (PICTURE-IN-PICTURE) OPERATION
The PIP(picture-in-picture) feature letsyou displaya second,smaller
picture on top of the main picture.
Your TV isequipped with a single tuner that tunes to cable or off-air
television signals.The PIPfeature on your TV requiresa secondvideo
source,like a VCR or satellite receiverto supply the secondpicture to the
screen.The PIPfeature also requiresconnecting the secondvideo source
to the TV with audio/video cables.
PIP Buttons
There are four remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the window.
When PIP Caption Display - Alternate with PIP - has been selected, will
display captioning in the PIP window.
MOVE buttons Let you move the PIP window to different areas of the
screen.
SWAP Switches, or "swaps," the video from the PIP window with the
main picture.
CH CTRL (Channel Control) Lets you switch channel control between
the PIP window and the main picture.
Using the PIP Feature
While you may use PIP in different ways, this basic PIP scenario should
get you started. While watching the TV, follow these steps to use your
VCR to supply the picture for PIP.
1. Pressthe PIP button on the remote. The PIP window appears on the
screen.
2. Turn on the VCR.
.
4.
5,
Press the TV button, then pressWHO-INPUT until you see the VCR
signal displayed in the PIP window. The PIP window should display
the channel that you have the VCR tuned to.
At this point, in order to change the program in the PIP window,
you need to change the channel on the VCR because that isthe
signal source for the PIP picture.
Use the channel up and down buttons and the other PIP buttons,
MOVE, SWAP and CH CTRL to adjust the two pictures.
PIP buttons
Move
buttons
37