Table of Contents
Advertisement
Using
TV%
enu
To enter a number greater than 99, press and hold
"I" to enter the hundreds digit, then press the two
remaining numbers.
Channel Menu
Signal
Type
Displays
a choice
list tllat lets yon select
the current
antenna
type. This option
does not appear
when
the GUIDE
Plus+
system
is set up.
UHF/VHFAntenna
Choose
this if you are currently
using
an ot]Lair
antenna
lk)r TV signals.
Cable TV Choose this if you are currently using cable or a cable box [k>r
TV signals.
Auto
Channel Search
"Ii,lls tl_e TV to search automatically
tk>r all the channels
available through tile antenna input, When the TV finds an active channel, it
places it in the Normal channel list; inactive channels
(weak stations or
channels
with no signal at all) will be removed l_com the channel list. If you are
using a cable box and have set up tile GUIDE Plus+ system, this option does
not appear.
List andLabels
Displays a control panel that lets you edit your Normal
channel list and choose a six-character
label t_)r each channel. Follow the on-
screen directions
to enter your channels and other inlk>rmation.
Channel
#
tse the Lip and down arrows to scroll up and down through
the channels
available via your anl*,nna. You can enter the channel number
directly using the number bultons.
NormalList
Only the channels
included
in the Normal list are available
when you scan Lip and down using channel up and down. Lse tile up and
down arrow buuons to indicate whether the channel number indicat_,d is
included (Yes) or is not included
(2Vo)in the Normal channel list.
ChannelLabel
Use tile up and down arrow buttons to enter a six-
character label tk>r each channel.
Hold the buuon
down to scroll quickly
through the characters. The TV can store up to 27 labels in memory.
Auto
Tuning
Displays a choice list tlmt lets you set Lip the TV to automatically
tune to the correct input channel when you press a component
bulton (VCR,
DVD, or SAT,.CABLE) on tile remote. Go to Chapter 3 fk)r details about the Auto
Tuning t>ature.
Time Menu
Sleep Timer
Displays a control panel that lets you select the amount of time
you want to give the TV bet_)re it shuts itself off,
Schedule
Displays a control panel that lets you set up a schedule
tk)r turning
the TV on and olT automatically.
Reminder: you must turn tile schedule
On. The
on-screen
directions guide you through the steps needed
to set the schedule.
Set Time
Displays a control panel tlmt lets you enter the current time. The on-
screen directions
guide you through the steps needed
to set the time, If your
GUIDE Plus+ system is set tip, it will automatically
update your time and this
option will not appear.
52
Advertisement
Table of Contents
