Tv + Vcr + Dvd Player - RCA F32TF720YX2 User Manual

C@nnect @ns Setup
TV + VCR + DVD Player
1. Connect your IW to your DVD player
A. Connect the audio cables (white and red) to tile INPt T2 AI_DIO R and L jacks on tile
back of the TV and to the Audio Output Jacks on tile DVD player.
B. If your DVD player has Component Output Jacks (Y, Ps, P_), connect three video grade
cables to lhe Y; P_, Pj_jacks on the DVD player and lo the Y, P_, PR jacks on the back of
the TV. If your DVD player doesn't have Y, P_, PR jacks, go to C.
-OR-
C. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on
lhe DVD phtyer and the S-VIDEO jack on the back of the TV. If your DVD player doesn't
have an S-Video jack, go to D.
Note: If you connectan S-Videocable,you must connectthe audio cablesto the INPUTIAUDIORand
L
jacks on
the back of the
TV,
not the INPUT2 AUDIO
jacks.
-OR-
1). Connect a vi&,o cable (yellow) to the Video Output Jack on tile I)VD player and to tilt,
INPUT2 VIDEO jack on the back of the TV.
2. Connect your TV to your VCR
Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to tile Output Jack
on your VCR (sometimes labeled OUT TO TV).
Note: If your VCRhasA/V
input jacks,
you can connectyour TVto your VCR
using
audio/videocables
for better
quality
3. Connect cable or antenna to your VCR
Connvct tile coaxial cable t)com your cable outlet or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
4. Connect the G-LINK cable to the TV
If you haven't already done so, remove lhe l)emo Pin l_com tile G-LINK jack. Then, connvct
the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the
G-LINK cable to work with your VCR (instructions are on page 14).
Go to page 14
Chapter I
11