Table of Contents
Advertisement
Using
%%
"File choices and a brief explanation
tk)llow:
Noteonneeted
Choose this if you don't have this particular component
connected
to tile TV, or if you don't want tile TV to automatically
tune to the
correct channel when you're using this component.
Channel2
(SAT/CABLE only)
Component
(satellite or cable box) is
connected
to the CABLE/ANTENNA jack on the back of the TV, and you want
the TV to tune to channel 2 when you press tile SKI',, CABLE button on tile
remote. Reminder: make sure the component's
Channel 2/3/4 swilch is set to
channel 2. Usually this switch is on the back of the component.
Channel3
Component
is connected
to the CABLE/ANTENNA jack on tile back
of the TV, and you want tile TV to tune to channel 3 when you press tile
corresponding
bulton on tile remote. R_.minder: make sure tile component's
Channel 3/4 switch is set to channel 3.
Channel
4
Component
is connected
to lhe CABLE/ANTENNA jack on the
back of the TV, and you want the TV to tune to channel 4 when you press the
corresponding
bulton on tile remote. Reminder: make sure tile component's
Channel 3/4 switch is set to channel 4.
Video Input 1
Component
is connected
to tile INPI_ T1 VIDEO jack on the
back of the TV and you want the TV to tune to VID1 Input Channel when you
press the component
button.
Video
Input
2
Component
is connected
to tile INPtT2
VIDEO
jack
on the
back
of the TV and
you want
the TV to tune to VID2 Input
Channel
when
you
press
the component
button.
Note: You should choose Video Input 1 or 2 for your VCRif you connected it to the
TV with audio/video cables.
39
Advertisement
Table of Contents
