Tv + Vcr - RCA F32TF720YX2 User Manual

C@nnect @ns Setup
TV (back panel)
R L
From Cable
orAflteflna
TV + VCR
1. Connect your TV to your VCR
2.
1 7
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your T\ and to the Output Jack on
your VCP, (sometimes labeled OUT TO TV).
B. Connect the audio/video cables, Connect audio cables (white and red) to the INt I_T2 ALDIO
R and L jacks on the back ot the TV and to the Audio Output Jacks on the VCR (sonletinles
labeled OUT R L).
C. Connect the video cable (yellow) to the INPUT2 VIDEO jack on the back ot the TV and to the
Video Output Jack on the VCR.
Connect cable or antenna to your VCR
Connect tile coaxi;tl cable troln your cabh, outlet or antenna to the Input Jack on your VCR
(sonletimes labeled IN FROM ANTENNA or IN FROM ANT).
3. Connect the G-LINK cable to the TV
If you haven't already done so, remove the Demo Pin lrom the (}-LINK jack, Then, connect the
G-LINK cable to the (}-LINK jack on the TV. Next step, phtce one <3!the wands <3!the G-LINK
cable to work with your VCP, (instructions are on page 14).
Go to page 14
8 Chapter I