RCA VR673HF User Manual page 26

Recording While You're Away
Select Cable Box or Satellite Receiver Viewing Channel
(Required Only if All Channels Are Received From a Cable Box or Satellite Receiver)
After you select the cable box or satellite receiver viewing channel, the VCR will automatically enter the o atput channel of your cable
box or satellite receiver in the VCR PLUS+ and Timer Programming menus as the channel to be recorded. No VCR Plus+ setup is
required when you use a cable or satellite receiver.
Operating Instructions
1.
Press MENU,PROG on the remote to display the VCR
MAIN MENU on the TV screen.
2. Press 4 to display CHANNEL SETUP menu.
3. Press 4 to display Sat./Cable Box Setup menu.
4. Press 1 when the Sat./Cable Box Setup menu
appears.
5. Press two numbers on the remote to enter the output
channel of your cable box or satellite receiver. Press
0 before a single-digit number. For Example: Press
03 for channel 3.
If you connected your cable box or satellite receiver
to the VCR using the cable box or satellite receiver's
AUDIO/VIDEO OUT jacks, press INPUT on the remote
to select the VIDEO IN option.
Press CLEAR to erase a number.
6. Press MENUopROG when you are finished. A
message appears which will time out, or press
MENU,PROG to return to CHANNEL SETUP screen.
7o
The VCR will now automatically enter the output
channel of your cable box or satellite receiver as the
channel to be recorded in the VCR PLUS+ and Timer
Programming menus.
Exit the menu system by following directions at the
bottom of the screen.
VCR MAIN MENU
1 VCFL
PLUS+ Programming
2 Timer Programming
3 Review Programs
Channel Setup
CHANNEL SETUP
Auto-Search Channels
Add/Remove Channels
Tuning: CABLE
Sat./Cable Box Setup
Is a cable or satellite
box being used with the
VCR for all channels?
1 Yes. continue
Enter the channel
number for viewing the
sat./cabL_/box signal
Press 01-1!5 or INPUT
Press MENU to exit
Your VCR will now
receive all channels
from the sat./cable
box on VCR CH 03
Press MENU to exit
; _
26