Table of Contents
Advertisement
Using
the
Playback
Features
DISPLAY
Button
1. Press DISPLAY to display
the status of the VCR, channel
number,
time counter,
date, time, and tape speed on the TV
screen.
The time and date must be set before they are displayed.
If you
do not press DISPLAY again, this display will time out.
2. Press DISPLAY again to continually
display
the time counter
on
the TV screen.
The time counter
will appear
instead of the time
in the VCR's display
panel.
3. Press DISPLAY again to remove the time counter
from the TV.
The time counter
will remain in the VCR's display panel and no
status displays
will appear on the TV screen.
This is convenient
for editing tapes.
4. Press DISPLAY again to return
to the normal display
mode.
The clock will appear in the VCR's display panel.
Frame
Advance
(F.ADV
Button)
Frame advance
lets you view one stop-action
frame after another.
Frame
advance
works best for tapes recorded
in the SP or SLP speed.
1. Press PAUSE to stop the action.
2. Press F.ADV each time you want to view the next frame of the
scene.
3. Press PAUSE or PLAY to resume normal playback.
Press
DISPLAY
Press
DISPLAY
Again
Press
DISPLAY
Again
5TOP
CH
05
D:3{]:00
Status Displays
11/18/94
FRI
01:30AM
SLP
0:311:00
Minutes
Seconds
Time Counter Only
No Displays
Automatic
Tracking
The VCR has automatic
tracking
which adjusts
the picture when playing
back a tape recorded
on another
VCR. Automatic
tracking
is turned
on
whenever
a tape is inserted
or the VCR's power is turned
on.
Manual
Tracking
Occasionally,
you may need to manually
adjust tracking
on a tape recorded
on a different
VCR or camcorder.
The TRACKING buttons
on the remote or
CHANNEL.TRACKING
on the VCR are used when playing a tape.
They have
no effect during
recording.
When streaks or snow appear
during normal or slow-motion
playback,
press TRACKING up or down on remote or CHANNEL,TRACKING on VCR
for the best possible picture.
During
stop-action
pause, use the TRAGKING
buttons
to reduce
picture jilter.
19
Advertisement
Table of Contents
