RCA CC439 User Manual page 72

AE Shutter-Speed or
INDEX Indicator Does
Not Appear in
Viewfinder
Date and Time (or Date)
were Recorded on the
Tape
Date and Time Appear
Incorrect
Camcorder Does Not
Turn On and/or
Function Buttons Will
Not Operate
• CAMERA/OFF/VCR switch must be in CAMERA,
and press DISPLAY to display the indications.
Date and time (or date) will be recorded on the tape
whenever they appear in the viewfinder. Press
DATE/TIME to remove them from the viewfinder
when recording.
• Make sure the date and time have been set. Details
on page 26.
• The camcorder's internal clock battery may need
recharging. Details on page 27.
Remove the power source.
After one minute press the
reset switch gently using a
non-metallic pointed item,
such as a toothpick, until
you feel a click. This resets
the camcorder to the factory
settings and erases the date,
time, and custom settings.
Note: When connecting a
power source again, wait for
about one minute after the
reset switch is pressed.
A_ i_:_T_ Switch
_C439 Only)
Reset Switch
70