Table of Contents
Advertisement
Audio Dubbing
-
The audio dub feature lets you record new audio
(sound) on a previously
recorded tape without erasing
the original video (picture).
The previous audio is
erased and replaced with the new audio.
The audio dub feature increases your editing
flexibility. Video segments can first be assembled and
then a single narration or music background can be
added.
The new audio can be added:
• You can speak into the camcorder's
built-in
microphone.
(Applicable
to CC434
and CC439)
• You can connect
an external
sound system
to the
white AUDIO
jack on the CC439
camcorder
only.
.
.
.
..
To Audio Dub
°
Press and hold the small button
on
CAMERAJOFF/VCR
while sliding
it
to VCR.
°
For model CC439, if you are
recording from a source connected to
the white AUDIO jack on the side of
the camcorder,
place AV OUT/IN
switch to IN.
3. Insert the tape you want to audio dub
and use PLAY, F.FWD,
and
REW/REVIEW
to locate a point on the
tape a few seconds
before you want to
begin dubbing.
4. Press REC/PA
USE exactly
where
you
want to begin dubbing.
This will place
the camcorder
in play pause.
5. Press and hold AVDUB,
and then
press PLAK
Release
both buttons
at
the same time. A. DUB
Jl will appear
in the viewfinder
when the camcorder
is ready to begin audio dubbing.
A.DUB
II
.
To begin dubbing, start the audio
source and press REC/PAUSE.
, will disappear from the viewfinder
while you are dubbing.
7. Press STOP/EJECT
when you are
finished dubbing.
Remember:
For CC439 only, place the
A V OUT/IN switch to OUT to record on
the camcorder.
Notes:
If you want to stop dubbing
at a
certain
point on the tape, turn on memory
stop, and set tape counter
to "0000M"
at the
point where you want the dubbing
to stop.
The camcorder
will stop dubbing
automatically
when it reaches
"O000M."
39
Hide quick links:
Advertisement
Table of Contents
