Table of Contents
Advertisement
The digital remote control that came
packed with your TV is also capable of
controlling
a compatible
audio
component.
To program the remote press and hold
the AUDIO button and then enter the
two-digit code number for your brand
of audio equipment.
-Programming
Remote to Control Audio Equipment
1. Refer to the chart below to find the
code number that corresponds
to
the .brand name of your audio
equipment.
If more than one
number is listed, you maY need to
try each one separately to find the
one that works.
2. Press and hold the AUDIO button
on remote (depending
on which
button you want to program).
3. Press two number buttons (first
one, then the other) to enter the
code number for your brand of
audio equipment.
Note: You must press the two number
buttons while holding the AUDIO
button.
4. Point the remote at the audio
equipment and press the POWER
button to test the code number.
Operating
Notes:
After the AUDIO button is programmed, the
buttons described below will operate the
basic functions of the audio equipment.
Depending on the age. brand, model, and
type of audio equipment, some models may
not be able to respond to all the function
buttons listed below. You will want to
experiment with each button to determine the
exact function for your component.
• POWER:
Press to turn on component.
Press again to turn off. Some components
will turn on automatically when you press
this button.
• VOL: Press to change volume level. _
• CHAN: Press to select the next higher or
lower-channel in the component's channel
memory.
• Number Buttons: Press tWO numbers to
directly select a channel•
• PLAY: Press to start component playing:
• PAUSE: Press to pause play or record. To
release pause, press again.
• If the right number
was entered .......
Press to stop whatever the
component is doing: playing, recording,
the audio equipment
will turn on.'
rewinding, etc.
• If the audio equipment
does not
• REW (Rewind):
Press while component
react to the remote, repeat
steps 1
is stopped to rewind tape.
thru 4 with another
code number.
• FF (Fast Forward):
Press while
component is stopped to fast forward tape.
• REC (Reeord):
Press to start recording.
• ANT (Antenna):
Performs various
,
functions depending on the type of
equipment.
Experiment with this button.
AMP
AM/FM
CD
TAPE
PHONO
AUX
Dimensia
03
07
06
05
04
RCA
24
03
06
05
04,54
Note-
Refer to the information
sheet packed with your remote control
for the latest list of brand names
and code numbers.
Because
this list of
brand names
is continually
growing,
the information
sheet packed
with your remote control
may be a later version
of this list and contain
additional
brands
and/or code numbers.
37
Advertisement
Table of Contents
