Table of Contents
Advertisement
The VCR 1 CHAN function
lets you
program
to which channel the TV
will automatically
tune when you
press the VCR1 button on the remote.
This is handy if you connect a VCR
to your TV. You will no longer have
to remember
to which input jacks the
VCR is connected
because the TV
will remember
for you.
For example,
if you connect
a VCR's
AUDIO/VIDEO
OUT jacks to the
TV's INPUT 1 jacks (as shown on
page 30), you will no longer have to
remember
to select channel 91 on the
TV to see what the VCR is playing.
By entering
channel 91 next to the
VCR 1 CHAN function,
the TV will
automatically
tune to channel 91
each time you press the VCR1 button
on the remote.
This function
is especially
convenient
if you have a compatible
VCR that can be operated by the
VCR1 button on the remote.
Pressing
VCR1 will then not only turn on the
VCR but also automatically
tune the
TV to the proper channel for viewing
the picture from the VCR.
You can
program
most brands of remote-
controllable
VCRs to respond
to the
VCR1 button as described
on
page 33.
The VCR 2 CHAN function
works
the same way. It lets you program
to
which channel the TV will
automatically
tune when you press
the VCR2oLD button on the remote.
You can program
most brands of
remote-controllable
VCRs to respond
to the VCR2oLD button as described
on page 33. Pressing
the VCR2oLD
button will then not only turn on the
VCR but also automatically
tune the
TV to the proper channel for viewing
the picture from the VCR.
22
-Setting
Up VCR Channels
(with or without remote)
1. Repeatedly press MENUopROG to
4. If you have another VCR connected
select SETUP MENU, and then press
to the TV, press MENUopROG to
+ or - to display the setup functions,
select the VCR 2 CHAN function.
Repeatedly press MENUopROG to
select the VCR 1 CHAN function.
Enter the channel number you want to
program by pressing two digit buttons
on the remote Control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the VCR1 button
on the remote.)
Enter the channel number you want
,to program by pressing two digit
buttons on the remote control. (This
is the channel number to which the
TV will tune automatically when you
later press the VCR2oLD button on
the remote.) See the notes below if
you are unsure about which channel
number to enter.
3. Press the + button to program the
channel number you selected into the
TV's memory.
6. Press the + button to program
the
channel
number
you selected
into the
VCR 2 CHAN function
memory.
Note: Pressing the - button here will turn
off this feature and display
VCR 1 CHAN: OFF again,
Note: Pressing the - button here will
turn off this feature and display
VCR 2 CHAN: OFF again.
Notes about Entering Channel Number:
• Enter channel 91 if VCR is connected to the TV's audio and video INPUT 1 jacks.
• Enter channel 92 if VCR is connected to the TV's audio and video INPUT 2 jacks.
• Enter channel 90 if you have a Super-VHS VCR that is connected to the TV's
S-VIDEO connector'and INPUT 1 audio jacks (labeled L and R/MONO).
• Enter channel 03 (or 04) if you did not use any audio/video cables and connected the
VCR to the TV's round antenna jack labeled CABLE/ANTENNA.
Enter the same
'channel number (03 or 04) as the position of the VCR's CH3/CH4 switch. This is
the channel to which you must tune your TV for viewing signals from your VCR.
• Refer to pages 30-31 if you want to review details about connecting your VCR to
your TV.
Advertisement
Table of Contents
