Table of Contents
Advertisement
Follow one of the steps below to connect an indoor or outdoor
antenna
to your TV (only if you do not have
a
cable-TV
system).
A
If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
CABLE/ANTENNA
,ncom.
tO p
Cable
From
_
BACK
Home
OF TV
Antenna
VHF or UHF Only
or
VHFIUHF
Comblnatlon
B
-OR-
If the antenna cable coming from your home antenna is a 300-ohm flat twin lead that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming
,Cable
From
Home
Antenna
__----.L
....
V.F
"
or U HF On,y
or
.
Antenna
Adapter*
VHF/UHF Comblnatlon
(such as RCA # 1939831
Push on
CABLE/ANTENNA
BACK
OF I"V
C
D
26
--OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that Carries VHF (channels 2-13)
and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like this:
Incoming
UHF
I;
,
_
_.
BACK
From _
and
--.
Mixer*
OF TV
Home
_
_
\\
(such as RCA#197551)
Antenna(s)
VHF
-OR-
,
i
If the antenna wires coming from your home antenna(s) are two 300-ohm flat twin-lead cables as shown here, connect them
to your set like this:
"
CABLE/ANTENNA
Push on
Antenna MJxer*
(such as RCA#193984)
BACK
OF TV
Note: Be sure to connect the UHF antenna cable to the UHF screws on the Antenna
Mixer and the _VHFantenna cable to the screws marked VHF.
* Optional accessories are available from most dealers or electronics supply stores.
Advertisement
Table of Contents
