Table of Contents
Advertisement
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
0 Exit
The PREFERENCES menu allows
changes to be made to a variety
of different VCR features.
Chapter 2
Additional Set Up Features in the
Preferences Menu
ON
ON
2:00
Note: The features described on the following pages are all accessed
BRIGHT
through the PREFERENCES menu.
SLP
To Access the PREFERENCES Menu:
1. Press the MENU button to display the VCR MAIN MENU.
2. Press 5 to choose PREFERENCES.
You are now ready to select an item from the PREFERENCES menu to set up.
Remote VCR1/VCR2 Option
Some universal remote controls can operate up to two VCRs. If you have a
universal remote control with this ability, your RCA VCR can be controlled with
either the VCR1 or VCR2 button. See the documentation that came with your
universal remote control for details about programming it to control your RCA VCR.
In the Preferences menu, press 1 to select the Remote Control feature. Then
press the VCR2 button on your universal remote control to change the setting.
The VCR will only respond to the universal remote control's VCR2 button. To
change the remote control setting back to VCR1, display the PREFERENCES
menu, press 1, and then press the VCR1 button on the universal remote control.
Note: Remember you must press VCR1 or VCR2 on the remote control—
whichever is selected in the menu—before the remote will operate the VCR.
Auto Play
With Auto Play turned ON (the factory default setting), the VCR automatically
starts playback when you insert a tape with its safety tab removed.
To Access Auto Play:
1. In the PREFERENCES menu, press 2 repeatedly to switch between Auto
Play: ON and OFF.
•
Select ON if you want a tape with its safety tab removed to start playing
automatically when inserted.
•
Select OFF if you do not want a tape with its safety tab removed to start
playing automatically.
Using On-Screen Menus
21
Advertisement
Table of Contents
