Table of Contents
Advertisement
Using the Battery to Power Your Camcorder
CHG
Hold Battery
Indicator
Flush and
Slide
POWER
Indicator
END
Indicator
REFRESH-
Button
Reference Marks
To AC Wall
Outlet 100-240
Volts, 50/60 Hz.
_adapter/ch_tgerl
_0 not _urn lhem ......
pside own: ::
_he
fall off and b_
Indicator
Adapter/Charger
Charge the Battery
If the power connector
is attached
to the
DC OUT jack on the adapter/charger,
remove its plug.
1. Align reference mark on battery with
mark on adapter/charger.
2. Hold the battery
flush against the
adapter/charger
and slide it in the
direction
of the arrow.
3. Plug adapter/charger
into nearest AC
outlet (100-240V,
50/60Hz).
4. If the battery
is properly
connected,
the
adapter/charger's
CHG (charge)
indicator will light.
Note: If you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator to light.
5. After the battery is charged,
the END
indicator
will light.
6. Remove
the charged
battery by sliding
it off the adapter/charger.
7. Attach
the charged
battery to the
camcorder.
Use the REFRESH
Button
The battery will provide increased
operation time if you "refresh" it after
five chargings. The refresh feature
"refreshes" the battery by completely
discharging it.
1. Attach battery to adapter/charger.
2. Press REFRESH. The REFRESH
indicator will light and the battery will
begin discharging.
3. When discharging is completed, the
REFRESH indicator will turn off, and
the CHG indicator will light. The
battery will then charge.
4. After the battery is charged, the END
indicator will light. Remove the
battery from the adapter/charger.
12
Advertisement
Table of Contents
