Tv+ A/V Receiver Or Speakers - RCA D52W15BYX1 User Manual

Connections Setup
TV+ A/V Receiver or Speakers
These are two different ways your TV uses a co_:qponent to hear audio.
1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTFUT jacks and
to the Audio Inputs on the A/V receiver.
• FIXED provides fixed-level audio oulput from the "IV. This audio output is ideal for
connecting to an A/V receiver that has its own volume control.
• VARIABLE provides variable-level audio output. Volume levels can be con_olled by
the volm:qe controls on the TV and TV remote con_ol.
-O1R-
2. Use speaker wire to connect the "IV to external speakers.
• The EXT/INT switch beside the iacks let you turn the TV's internal speakers on or
off. If you connect external speakei:s, slide the switch to EXT so the audio is sent to
lhe external speakers only. Choosing 1NT sends the audio to the TV's speakei:s only.
Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.
f
m_ _ _ REmWR
I I
,,__
..... _
;;;;; rA_vl_oou_
\
Connect to either FIXED
or
VARIABLE Output
12
Graphics contained within lhis publication ar_ fi_r r_presentation only.
Chapter 1