Tv + Dvd + Vcr - RCA D52W15BYX1 User Manual

Hdtv
Table of Contents

Advertisement

Connections
Setup
TV + DVD + VCR
1.
Connect
your DVD Player to your TV.
A. Connect the audio (white and red) cables to the CMP1 L and R Audio jacks on the back of
tim TV and to the Audio Output iacks on the DVD player.
B. Connect three video grade cables to the CMP1 Y PB PR iacks on the back of the TV and to
llle Y PB PR jacks on the DVD player.
Notes:
If your DVD player does not have Y PB PRjacks, but does have an S-Video jack, connect the
player to the VID1 S-VIDEOjack on the TV using an S-Video cable.
If your DVD player does not have an S-Video jack, connect the player to the VID1 V (Video)
jack on the back of the TV using a video cable.
Important: If you use the VIDI S-VIDEOor V (Video)jack to connect your TV to the DVD
player, you must connect the audio cables to the VIDI L/MONO and Rjacks on the T_
2.
Connect
your VCR to your TV.
A. Connect a coaxial cable to the VCR's antenna
output and to the ANTENNA/CABLE Input
jack on the TV.
B. Connect the audio (white and red) cables to the VID2 L/MONO and R Audio iacks on the
back of the TV and to the Audio Output iacks on the VCR.
C. Connect the video cable to the VID2 V (Video) iack on the back of the TV and to the Video
Output jack on the VCR.
3.
Make sure cable or antenna
is connected
to your VCR.
Connect the coaxial cable from your cable outlet or antenna
to tim antenna input on the VCR.
Go to page 15
Chapter
1
Graphics contained
within this publication
are fi)r representation
only.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

D52w19byx1D52w17byx1D40w15byx1Hdtv monitorHdtv monitor

Table of Contents