Adjust Volume
©
VOLUME
Q
Still Mode
You can pause the image shown on theTV screen.
Press FREEZE to pause the image shown on theTV screen.
•
The sound output will not be paused.
•
If no signal is detected or protected
signal is received during still
mode, the image remains paused and the sound output will be
muted,
•
The still function will be released after 5 minutes.
To cancel still mode, press any button except
IdO(Standby-On).
Watch
Channels
from
a Set-top
Box
To watch
channels
from a set-top
box
t
Switch on the set-top box.
L_ The picture from your set-top box might appear automatically
on theTV screen.
2.
Use the remote control of your set-top box to select channels.
If the picture does not appear
To increase or decrease volume
Press VOL +/- on the remote control or press VOLUME
+/- on
the side oftheT_,
To mute or unmute sound
Press MUTE on the remote control to mute the sound.
Press MUTE again to restore the sound.
t
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2
Use the remote control of your set-top box to select channels.
Watch
Connected
Devices
To watch connected
devices
t
Switch on the connected
device.
L_ The picture from your connected
device might appear
automatically on theTV screen.
_2
Use the remote control of the device to select channels.
If the picture does not appear
t
Press SOURCE repeatedly to select the connected
device and wait
a few seconds for the picture to appear.
2
Use the remote control of the device to select channels.
12
EN