Watch A Dvd; Switchingaudio Node - Philips 19PFL3504D User Manual

Watch a DVD
To watch a DVD
t Insert a DVD disc into your player.
2 Press _ on the remote control of the DVD player to select
channels,
L_ The DVD might automatically play on theTV.
if the picture does not appear
t Press SAP to display the currently selected language and the
number of available languages.
2 Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
ii!!! i
t Press SOURCE repeatedly to select the DVD player and wait a
few seconds for the picture to appear.
2 Use the remote control of the DVD player to play the d isl<,
" SAP does not control external audio devices.
" The information display will autornatically disappear- in a few seconds,
Switching Audio Mode
This section describes how to switch the audio in the analog mode and
how to switch the audio language in the digital mode,
Press SAP to display the currently selected audio mode.While
receiving an NTS broadcast, press repeatedly to cycle through the
available audio channel.
When all audio are available
When stereo and monaural audio are available
When SAP and monaural audio are available
When only monaural audio is available
STEREO
SAP
MONO
(cannot be switched)
; Outputs stereo-audio
: Outputs second audio program
: Outputs mono-audio
EN 13