AdjustVolume
32PFL3504D
/ 32PFL3514D
®
VOLUME
Q
Still Mode
You can pause the image shown on theTV screen.
Press FREEZE to pause the image shown on theTV screen.
•
The sound output will not be paused.
•
If no signal is detected or protected
signal is received during still
mode, the image remains paused and the sound output will be
muted,
•
The still function will be released after 5 minutes.
To cancel still mode, press any button except IdO (Standby-On).
42PFL3704D
0-
®
VOLUME
®
Watch
Channels
from
a Set-top
Box
To watch
channels
from a set-top
box
t
Switch on the set-top box.
L_ The picture from your set-top box might appear automatically
on theTV screen.
_-
Use the remote control of your set-top box to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2
Use the remote control of your set-top box to select channels.
To increase or decrease volume
•
Press VOL +/- on the remote control or press VOLUME
+/- on
the side oftheTV,
To mute or unmute sound
Press MUTE on the remote control to mute the sound.
Press MUTE again to restore the sound.
Watch
Connected
Devices
To watch connected
devices
t
Switch on the connected device.
L_ The picture from your connected device might appear
automatically
on the TV screen.
2
Use the remote control of the device to select channels.
If the picture does not appear
t
Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2
Use the remote control of the device to select channels.
14
EN