Install Channels; Selectyour Nenu Language 2I; Setyour Location To Home 2I; Automatically Install Channels 2I - Philips 19PFL3504D User Manual

7 Install Channels
The first time you setup yourT_, you are prompted to select a menu
language and to instalIT_ and digital radio channels (if available).This
chapter provides instructions on how to reinstall and fine-tune channels.
SelectYour Menu Language
1 Press MENU on the remote control and select [LANGUAGE],
2
Press OK to start the installation.
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN. Enter your PIN in
order to complete the installation.
If you have forgotten your PIN, reset it as described in 'Change
your PIN' on page 17.
3
Select [Antenna] or [Cable] and press OK.
• When [Antenna] is sefected, theTV detects antenna signals. It
searches for NTSC and ATSC channels available in your area.
• When [Cable] is selected, theTV detects signals supplied by
cable. It searches for NTSC,ATSC, and QAiVi modulated
channels available in your area.
Back
iiiiii i
_///////////////////
2 Select a language and press OK to confirm your choice.
3 Press MENU to exit.
SetYour Location to Home
You can set the location ofyourTV to [Home] or [Retail].
Choosing Home gives you full flexibility to change predefined settings for
picture and sound.
t Press MENU on the remote control and select [FEATURES] >
[Location].
2 Select [Home] and press OK to confirm your choice.
3 Press MENU to exit.
Automatically Install Channels
Before you install channels, ensure that you are registered with your
cableTV provider and that your equipment is correctly connected.
t Press MENU on the remote control and select [SETUP] >
[Autoprogram],
_The illustration is discribed for 22PFL3504D.
• When autoprogramming is complete, the lowest memorized
channel will be displayed.
4 Follow the on-screen instructions to complete the installation.
Channel List
The channels selected here can be skipped when selecting the channels
using CH +/-.
Those channels can still be selected with the Number buttons.
t Press MENU on the remote control and select [SETUP] >
[Channel List],
Ohannel List
EN 21