Philips 19PFL3505D/F7 Service Manual

Chassis pl10.0

Hide thumbs Also See for 19PFL3505D/F7:

Quick start manual (8 pages)

User manual (36 pages)

Specifications (3 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

Service Manual

19"

downloaded or stored in any storage medium, in any form or for any purpose without the express prior written

consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto

is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content

herein without the obligation to notify any person or organization of such changes.

with the

without the express written consent of Funai. All other trademarks used herein remain the exclusive property of

their respective owners. Nothing contained in this manual should be construed as granting, by implication or

otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any

other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights

to the fullest extent of the law.

19PFL3505D/F7

design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way

chassis PL10.0

Contents

(Serial No. : DS1A**********)

(Serial No. : DS2A**********)

(Serial No. : DS3A**********)

(Serial No. : DS4A**********)

(Serial No. : XA1A**********)

(Serial No. : XA2A**********)

LCD TV

111105

Table of Contents

Summary of Contents for Philips 19PFL3505D/F7

Page 1 LCD TV chassis PL10.0 Service Manual Contents 19” 19PFL3505D/F7 (Serial No. : DS1A**********) 19” 19PFL3505D/F7 (Serial No. : DS2A**********) 19” 19PFL3505D/F7 (Serial No. : DS3A**********) 19” 19PFL3505D/F7 (Serial No. : DS4A**********) 19” 19PFL3505D/F7 (Serial No. : XA1A**********) 19” 19PFL3505D/F7 (Serial No. : XA2A**********) ©...
Page 2 IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all P&F Equipment. The service procedures recommended by P&F and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.
Page 3: Table Of Contents
TABLE OF CONTENTS Specifications ................1-1 Important Safety Precautions .
Page 4: Specifications
SPECIFICATIONS < TUNER / NTSC > ANT. Input ---------------------- 75 Ω Unbal., F type Description Condition Unit Nominal Limit 1. AFT Pull-In Range ±2.3 ±2.1 TV.ch.4 dBµ 2. Synchronizing Sens. CA.ch.31 dBµ CA.ch.87 dBµ < TUNER / ATSC > Description Condition Unit Nominal...
Page 5: Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
Page 6 3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.
Page 9: Standard Notes For Servicing
STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: Top View 1. Prepare the hot-air flat pack-IC desoldering Bottom View machine, then apply hot air to the Flat Pack-IC Input...
Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
Page 11 2. Installation With Iron Wire: 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
Page 12 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.
Page 13: Cabinet Disassembly Instructions
↓ ↓ ↓ ↓ ↓ [9] LCD Module Assembly : 19PFL3505D/F7 (Serial No.: DS1A) [15] Front Note: Cabinet (1) Order of steps in procedure. When reassembling, 2. Disassembly Method follow the steps in reverse order. These numbers are also used as the Identification (location) No. of Step/ parts in figures.
Page 14 [2] Rear Assembly (S-2) (S-3) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 PL10.0DC...
Page 15 Shield Box (H-1) [11] Speaker (S-12) [5] Jack [12] Function Holder(A) (S-7) (S-10) [14]* Junction (S-9) (S-11) (S-8) (S-14) [8] Stand Holder [6] Jack CBA [13] IR Sensor CBA (S-9) [7] Main CBA : 19PFL3505D/F7 (Serial No.: DS1A) Fig. D2 PL10.0DC...
Page 16 CN201 CN3902 CN301 CN3701 CN1001 CN302 CN3702 CN1002 Jack CBA CN702 CN872 CN102 CN701 AC CORD CN871 To Speaker Junction CBA CN101 CL102A To Speaker Function CBA IR Sensor CBA CL103B 19PFL3505D/F7 (Serial No.: DS1A) CL103A CL102B Fig. D3 PL10.0DC...
Page 17: Electrical Adjustment Instructions
ELECTRICAL ADJUSTMENT INSTRUCTIONS [19PFL3505D/F7 (Serial No.: DS1A, DS2A, DS3A, XA1A)] General Note: “CBA” is abbreviation for How to set up the service mode: “Circuit Board Assembly.” Service mode: Note: Electrical adjustments are required after 1. Turn the power on. replacing circuit components and certain mechanical parts.
Page 18 1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN ] Screen 1. Enter the Service mode. buttons 2. Each time the [7] button on the remote control unit M.
Page 19 The White Balance Adjustment should be 5. [CUTOFF] Press [1] button to select “COR” for Red Cutoff performed when replacing the LCD Panel adjustment. Press [3] button to select “COB” for or Digital Main CBA. Blue Cutoff adjustment. [DRIVE] 3. White Balance Adjustment Press [4] button to select “DR”...
Page 20 [19PFL3505D/F7 (Serial No.: DS4A, XA2A)] General Note: “CBA” is abbreviation for How to set up the service mode: “Circuit Board Assembly.” Service mode: Note: Electrical adjustments are required after 1. Turn the power on. replacing circuit components and certain mechanical parts. It is important to perform 2.
Page 21 1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN] Screen 1. Enter the Service mode. buttons 2. Each time the [7] button on the remote control unit M.
Page 22 The White Balance Adjustment should be 6. Press [MENU] button. The internal Raster signal appears on the screen. (“Internal (Single)” performed when replacing the LCD Panel appears on the upper right of the screen as shown or Digital Main CBA. below.) 3.
Page 23: How To Initialize The Lcd Tv
To put the program back at the factory-default, initialize the LCD TV using the following procedure. [19PFL3505D/F7 (Serial No.: DS1A, DS2A, DS3A, XA1A)] 1. Turn the power on.
Page 24: Firmware Renewal Mode
FIRMWARE RENEWAL MODE Equipment Required The appearance shown in *1 is described as follows. Appearance State a. USB storage device Downloading the firmware from b. Remote Control Unit Downloading... the USB storage device. Writing the downloaded firmware Writing... Firmware Update Procedure in flash memory.
Page 25: Troubleshooting
TROUBLESHOOTING [ Power Supply Section ] FLOW CHART NO.1 The power cannot be turned on. Is the fuse (F601) normal? See FLOW CHART No.2 <The fuse blows out.> Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective. (D601, D602, D603, D604, Q601, Q602, Q603, IC602, T601) Is the INV+31V line voltage normal?
Page 26 FLOW CHART NO.6 PANEL+24.5V is not output. FLOW CHART NO.7 PANEL+13V is not output. FLOW CHART NO.8 P-ON+7V is not output. FLOW CHART NO.9 P-ON+5V is not output. (PANEL+13V is outputted normally.) Replace Q636. PL10.0TR...
Page 27 FLOW CHART NO.10 TUNER+5V is not output. (PANEL+13V is outputted normally.) Replace Q637. FLOW CHART NO.11 P-ON+3V is not output. FLOW CHART NO.12 P-ON+3.3V(PANEL+3.3V) is not output. FLOW CHART NO.13 P-ON+9V is not output. (PANEL+13V is outputted normally.) Replace Q641. PL10.0TR...
Page 28 FLOW CHART NO.14 AL+3.3V is not output. (P-ON+7V is outputted normally) FLOW CHART NO.15 LCD-7.1V is not output. Replace Q206. FLOW CHART NO.16 SP+14V is not output. PL10.0TR...
Page 29 [ Video Signal Section ] FLOW CHART NO.1 The key operation is not functioning. Re-install the switches (SW101, SW103~SW107) correctly or replace the poor switch. Check the switches (SW101, SW103~SW107) and their periphery, and service it if defective. Replace Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit.
Page 30 FLOW CHART NO.4 Picture does not appear normally.(Tuner input) FLOW CHART NO.5 Picture does not appear normally.(S-Video input) Pin(6): S-VIDEO-C Pin(8): S-VIDEO-Y FLOW CHART NO.6 Picture does not appear normally.(Y/Pb/Pr input) Pin(15): VIDEO-Y Pin(17): VIDEO-Pb Pin(19): VIDEO-Pr PL10.0TR...
Page 31 [ Audio Signal Section ] FLOW CHART NO.1 Audio is not outputted normally.(Audio input) Check the line between Pin(2, 15) of IC771 and input terminal(JK753, JK754), and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.2 Audio is not outputted normally.(Component Audio input) Check the line between Pin(4, 11) of IC771 and input...
Page 32 FLOW CHART NO.3 Audio is not outputted normally.(Tuner input) Check TU301 or TU302 and their periphery circuit, and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.4 Audio is not outputted normally.(HDMI Audio input) Check the line between Pin(5, 14) of IC771 and input terminal(JK721, JK722), and service it if defective.
Page 33 FLOW CHART NO.5 Audio is not outputted normally.(PC Audio input) Check the line between Pin(1, 12) of IC771 and input terminal(JK711), and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. PL10.0TR...
Page 34: Block Diagrams
BLOCK DIAGRAMS System Control Block Diagram [19PFL3505D/F7 (Serial No.:DS1A)] PL10.0ABLS...
Page 35 System Control Block Diagram [19PFL3505D/F7 (Serial No.:DS2A, DS3A, XA1A)] PL10.0BBLS...
Page 36 System Control Block Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] PL10.0CBLS...
Page 37 Video Block Diagram PL10.0BLV...
Page 38 Audio Block Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] PL10.0ABLA...
Page 39 Audio Block Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] PL10.0BBLA...
Page 40 Digital Signal Process Block Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] PL10.0ABLD...
Page 41 Digital Signal Process Block Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] PL10.0BBLD...
Page 42 Inverter Block Diagram PL10.0BLINV...
Page 43 Power Supply Block Diagram 9-10 PL10.0BLP...
Page 44: Schematic Diagrams / Cba And Test Points
SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 45 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.
Page 46 Main 1 Schematic Diagram 10-3 PL10.0SCM1...
Page 47 Main 2 Schematic Diagram 10-4 PL10.0SCM2...
Page 48 Main 3 Schematic Diagram 10-5 PL10.0SCM3...
Page 49 Main 4 Schematic Diagram CAUTION ! NOTE: Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. The voltage for parts in hot circuit is measured using CAUTION ! : For continued protection against risk of fire, If Main Fuse (F601) is blown , check to see that all components in the power supply hot GND as a common terminal.
Page 50 Jack Schematic Diagram PL10.0SCJ 10-7...
Page 51 Function Schematic Diagram 10-8 PL10.0SCF...
Page 52 IR Sensor & Junction Schematic Diagram PL10.0SCIR 10-9...
Page 53 Digital Main 1 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
Page 54 Digital Main 2 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
Page 55 Digital Main 3 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
Page 56 Digital Main 4 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
Page 57 Digital Main 5 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
Page 58 Digital Main 1 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 59 Digital Main 2 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 60 Digital Main 3 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 61 Digital Main 4 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 62 Digital Main 5 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 63 Digital Main 6 Schematic Diagram [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] 2 NOTE: The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.
Page 64 Main CBA Top View [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] Because a hot chassis ground is present in the power supply CAUTION ! circuit, an isolation transformer must be used when repairing. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
Page 65 Main CBA Bottom View [19PFL3505D/F7 (Serial No.:DS1A, DS2A, DS3A, XA1A)] CAUTION ! Because a hot chassis ground is present in the power supply Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! : For continued protection against risk of fire, circuit, an isolation transformer must be used when repairing.
Page 66 Main CBA Top View [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] Because a hot chassis ground is present in the power supply CAUTION ! circuit, an isolation transformer must be used when repairing. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
Page 67 Main CBA Bottom View [19PFL3505D/F7 (Serial No.:DS4A, XA2A)] CAUTION ! Because a hot chassis ground is present in the power supply Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! : For continued protection against risk of fire, circuit, an isolation transformer must be used when repairing.
Page 68 Jack CBA, Function CBA, IR Sensor CBA & Junction CBA Top View Junction CBA [19PFL3505D/F7 (Serial No.:DS1A)] Not Used Function CBA IR Sensor CBA Not Used Jack CBA BA01N2F01021 10-25...
Page 69 Jack CBA, Function CBA, IR Sensor CBA & Junction CBA Bottom View Junction CBA [19PFL3505D/F7 (Serial No.:DS1A)] IR Sensor CBA Not Used Function CBA Not Used Jack CBA BA01N2F01021 10-26...
Page 70: Waveforms
WAVEFORMS WF1 ~ WF7 = Waveforms to be observed at Waveform check points. (Shown in Schematic Diagram.) Input: NTSC Color Bar Signal (with 1kHz Audio Signal) Pin 4 of CN302 Pin 17 of CN302 CVBS 0.2V 20µs VIDEO-Pb 0.2V 20µs Pin 8 of CN302 Pin 19 of CN302 20µs...
Page 71: Wiring Diagram
WIRING DIAGRAM [19PFL3505D/F7 (Serial No.:DS1A)] PL10.0AWI 12-1...
Page 72 [19PFL3505D/F7 (Serial No.:DS2A, DS3A, DS4A, XA1A, XA2A)] PL10.0BWI 12-2...
Page 73: Exploded Views
EXPLODED VIEWS Cabinet [19PFL3505D/F7 (Serial No.: DS1A, DS2A, DS3A, XA1A)] 19PFL3505D/F7 (Serial No.: DS3A, XA1A) 19PFL3505D/F7 (Serial No.: DS3A) 19PFL3505D/F7 (Serial No.: XA1A) Rear Assembly Digital Main CBA Unit SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Junction CBA Function CBA...
Page 74 Cabinet [19PFL3505D/F7 (Serial No.: DS4A, XA2A)] Rear Assembly Digital Main CBA Unit SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Function CBA LCD1 CL701 CL102 CL103 IR Sensor CBA Jack CBA Main CBA Stand Assembly See Electrical Parts List for parts with this mark.
Page 75 Packing [19PFL3505D/F7 (Serial No.: DS1A, DS2A)] Tape Stand Assembly Packing Tape Tape Packing Tape Packing Tape Some Ref. Numbers are not in sequence. Packing Tape 13-3 PL10.0PEX...
Page 76 Packing [19PFL3505D/F7 (Serial No.: DS3A, XA1A)] 19PFL3505D/F7 (Serial No.: DS3A) Tape Tape Stand Packing Assembly Tape Packing Tape Packing Tape Some Ref. Numbers are not in sequence. 19PFL3505D/F7 (Serial No.: XA1A) 13-4 PL10.0PEX...
Page 77 Packing [19PFL3505D/F7 (Serial No.: DS4A, XA2A)] Tape Tape Stand Packing Assembly Tape Packing Tape Packing Tape Some Ref. Numbers are not in sequence. 13-5 PL10.0PEX...
Page 78: Parts List
PARTS LIST [19PFL3505D/F7 (Serial No. : DS1A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. BATTERY R03-B500/01S XB0M451CZB01 Before replacing any of these components, read QUICK START GUIDE A01N2UH...
Page 79 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C609 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 Before replacing any of these components, read C610 ELECTROLYTIC CAP . 100µF/50V M CE1JMASDL101 carefully the product safety notice in this service C611...
Page 80 Ref. No. Description Part No. Ref. No. Description Part No. C833 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V CHD1JZ30F104 D209 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1001 CAP CERAMIC (AX) 2200pF/50V/B/K CA1J222TU061 D210 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1002 POLYESTER FILM CAP . (PB FREE) 0.022µF/ CA2A223DT018 D401 DIODE FR104-B...
Page 81 Ref. No. Description Part No. Ref. No. Description Part No. D1001 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q402 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1002 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q601# FET MOS TK5A50D QEWZTK5A50DQ D1003 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q602 FET POWER MOS SMD KHB1D0N60D-RTF/ NF1ZKHB1D0N6 D1004 SWITCHING DIODE 1SS133(T-77)
Page 82 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω CHIP RES. 1/10W J 47k Ω R225 RRXAZR5Z0000 R647 RRXAJR5Z0473 RES CARBON FILM T 1/4W J 10 Ω CHIP RES. 1/10W J 10k Ω R226 RCX4100T1001 R648 RRXAJR5Z0103...
Page 83 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 10k Ω CHIP RES. 1/10W J 1k Ω R838 RCX4103T1001 R1069 RRXAJR5Z0102 CHIP RES. 1/10W J 27k Ω CHIP RES. 1/10W J 1k Ω R842 RRXAJR5Z0273 R1070...
Page 84 JACK ASSEMBLY Ref. No. Description Part No. CHIP RES.(1608) 1/10W F 75 Ω R731 RRXAFR5H75R0 Ref. No. Description Part No. CHIP RES.(1608) 1/10W F 75 Ω R732 RRXAFR5H75R0 JACK ASSEMBLY A01N2MJC-001 CHIP RES.(1608) 1/10W F 75 Ω R733 RRXAFR5H75R0 Consists of the following: CHIP RES.
Page 85 Ref. No. Description Part No. JK752 JACK RCA PCB L RCA-101S(1)-03 JXRL010YUQ12 JK753 JACK RCA PCB L RCA-101S(1)-04 JXRL010YUQ13 JK754 JACK SW RCA PCB L RCA-102F(RD) JYRL010YUQ05 JK841 JACK RCA PCB S ORANGE 01/RCA-101H(OR) JXRJ010YUQ06 JK851 JACK SW HPEP SML PCB L PJ-350 JYSL010YUQ03 CHIP RES.(1608) 1/10W 0 Ω...
Page 86 PARTS LIST [19PFL3505D/F7 (Serial No. : DS2A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
Page 87 Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model 19PFL3505D/F7 (Serial No.: DS1A) Ref. No. Description Part No. MAIN CBA A01N2MPWA002 CHIP RES.(1608) 1/10W 0 Ω...
Page 88 PARTS LIST [19PFL3505D/F7 (Serial No. : DS3A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
Page 89 Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model 19PFL3505D/F7 (Serial No.: DS1A) Ref. No. Description Part No. MAIN CBA A01N2MPWA002 CHIP RES.(1608) 1/10W 0 Ω...
Page 90 PARTS LIST [19PFL3505D/F7 (Serial No. : DS4A, XA2A)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. REMOTE CONTROL TRANSMITTER YKF259- URMT34JHG001 Before replacing any of these components, read...
Page 91 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C609 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 Before replacing any of these components, read C610 ELECTROLYTIC CAP . 100µF/50V M CE1JMASDL101 carefully the product safety notice in this service C611...
Page 92 Ref. No. Description Part No. Ref. No. Description Part No. C831 ELECTROLYTIC CAP . 100µF/16V M CE1CMASDL101 D206 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C832 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V CHD1JZ30F104 D207 DIODE ZENER 7V5BSA-T26 NDTA7R5BST26 C833 CHIP CERAMIC CAP .(1608) F Z 0.1µF/50V CHD1JZ30F104 D208 SWITCHING DIODE 1SS133(T-77)
Page 93 Ref. No. Description Part No. Ref. No. Description Part No. D805 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q207 TRANSISTOR 2SC2655-Y(TE6 F M) QQSY2SC2655F D808 DIODE ZENER 20BSB-T26 NDTB020BST26 Q208 TRANSISTOR 2SA1020-Y(TE6 F M) QQSY2SA1020F D809 DIODE ZENER 20BSB-T26 NDTB020BST26 Q209 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1001 SWITCHING DIODE 1SS133(T-77)
Page 94 Ref. No. Description Part No. Ref. No. Description Part No. RES CHIP 1608 1/10W J 47k Ω RES CHIP 1608 1/10W F 220 Ω R220 RRXA473HH013 R641 RTW2200HH008 RES CHIP 1608 1/10W J 22k Ω RES CHIP 1608 1/10W F 22.0k Ω R221 RRXA223HH013 R642...
Page 95 Ref. No. Description Part No. Ref. No. Description Part No. RES CHIP 1608 1/10W J 10k Ω RES CARBON FILM T 1/4W J 2.7k Ω R830 RRXA103HH013 R1065 RCX4272T1001 RES CHIP 1608 1/10W J 10k Ω RES CARBON FILM T 1/4W J 2.7k Ω R834 RRXA103HH013 R1066...
Page 96 Ref. No. Description Part No. Ref. No. Description Part No. RES CHIP 1608 1/10W J 100k Ω TM601 EYELET TYPE D-1 0VM406868 R721 RRXA104HH013 RES CHIP 1608 1/10W J 100k Ω TM602 EYELET TYPE D-1 0VM406868 R722 RRXA104HH013 RES CHIP 1608 1/10W J 56k Ω TU302 TUNER UNIT ATSC TDAU4-D05A UTNATS0AL002...
Page 97 Ref. No. Description Part No. JK732 JACK RCA PCB S BLUE 01/RCA-101H(BL) JXRJ010YUQ04 JK733 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01 JK741 JACK RCA PCB S WHITE 01/RCA-101H(WH) JXRJ010YUQ02 JK742 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01 JK751 JACK SW DIN PCB L DIN-435C(777D) JYEL040YUQ03 JK752 JACK RCA PCB L RCA-101S(1)-03...
Page 98: Revision History
19PFL3505D/F7 (Serial No. : DS3A) added • 2011-08-26 19PFL3505D/F7 (Serial No. : DS4A) added • 2011-11-05 19PFL3505D/F7 (Serial No. : XA2A) added Note: Identical product to the 19PFL3505D/F7 (Serial No.: DS4A). • TBD 19PFL3505D/F7 (Serial No. : XA1A) added 15-1 PL10.0REV...
Page 99 COMPARISON LIST OF MODEL NAME Chassis PL10.0 19PFL3505D/F7 (DS1A) A01N2UH (DS2A) A01N2UH (DS3A) A01NKUH (DS4A) A01NMUH (XA1A) A01NLMA (XA2A) A01NNMA PL10.0COM...

Philips 19PFL3505D/F7 Service Manual

Quick Links

Related Manuals for Philips 19PFL3505D/F7

Summary of Contents for Philips 19PFL3505D/F7

Table of Contents