Clock And Oven Control - Maytag CRG9700C User Manual

RANGE CONTROL PANEL
Electronic Clock and Oven Control
Stylin Z and t_atures may differ dependitl Z on the model you selected.
The electronic clock and oven control
on your Ma.vtag
range is used for the time-of-day clock, tiiner, bake,
broil, programmed oven operations and self-clean
(select models) t_mctions. A beep will sound each time a
Junction pad is pressed. The display window features
indicator words which will flash to prompt you when
setting tile {wen.
Tile display on the control will flash when power is first
supplied to the range or if'there is a power failure. Once
tile time-of day eloek ]ms been set (see Setting the
Clock, page 5), the display will stop flashing.
The oven will automatically turn
off if it is left on
for 12 hours.
NOTE: The electronic control is eqtupped with a
self-diagnostic feature for service use ONLY. If a
fault code (F plus a number, ex. F1) appears in the
display along with a continuous beeping sound,
press the CANCEL pad. See Before You Call for
Service lpage 17) if the fault code reappears in the
display,
The following pads are ('ound
on your
Maytag
electronic
eloek and oven eontroh
Cancel Pad
Press this pad to eancel all operations exeei)t the time-
otLdav dock and timer. If vou are ever unsure if"you've
programmed the control correctly, press the CANCEL
pa(t and sta_ over.
• and • Pads
Press or press and hold these pads to enter the time or
temperature desired. These pads are also used to select
Hi or Lo broil.
Timer Pad
The timer can be set from 1 mimlte to 9 hours. 50
minutes. It will count down bv seconds (when set t'or 1
mirmte) or mimltes (when set for "2 minutes or more
time). See page 5 for instructions on setting the timer.
PAGE 4