Select The Best Location - Goldstar WG1000R Owner's Manual

Installation
This room air conditioner is
designed for installation in standard
doubiehung windows with actual
opening widths from 22" to 36".
The upper andi lower window sash
must open sufficiently to al!ow a
clear ve_ical opening of i5" from the
bottom of the. upper sash to the
window stool.
WARNING:This product is a WINDOW AIR C,ONDITIONER. As such,
a standard single-hung ,or double-hung window is required for proper
installation. Non-window insta!lations, including using s!eeves, holes
in walls, and other installations are not recommended.
Select the best location
1. To prevent vibration and noise, make sure
the, unit: is !!installed securely and fiirmly
2. Install the unit where the sunlight does not
shine directly on the unit•
C_led air
3. The outside of the cabinet must extend _-.__.
outward for at least i i' and there should
be no obstacles, such as a fence or wall,./
within 20" from the back of the cabinet
because it will prevent Iheat radiation of the
Restriction d outside air will greatly r_uce
the c@!ing efficiency d the air conditioner.
Awning
Heat
radiation
1/2"
Over 20"
Fen_
• All side louver! o,f the cabinet must remain expos_ to the outside of the
structure.
4. install the unit a little slanted so the back is
slightly
lower than the front(about V2")..
This will force condensed water to flow to the outside.
5. Install the unit with the bottom about 30"~60" above the fl_r level.
12 Room Air ,Cond#i_er