Goldstar WG1000R Owner's Manual page 13

Ins_llation
1, Remove, the _rews which fasten the cabinet
a,t both sides and at the back:,
Use a long screwdriver and installing the
screws will be easier.
2. Slide the unit from the cabinet: by gdpping the
base pan handle and pulling forward while
bracing the cabineL
3:. Cut the window sash sea[ to the proper
length
Peel off the backing and attach the Foam-Pe
to, the underside of the window sash.
.
5_
Remove the backing from the top, Upper Guide
Fo,am-PE and attach it to the bottom of the
Upper Guioe
Attach the Upper Guide onto the top of the
cabinet with 3 Type A screws.
6. insert the Frame Guides into the bottom of
the cabinet,
.
,
Inse_ the Frame Cu_ain into the Upper Guide
and Frame Guides.
Fasten the cu_ains to the unit with 4 Type
A screws.
Foam Pe
(Type A) up#er G_ide
Screw
_ew
(Type A)
Frame Guides
(Type A)
Foarr_Pe
Frame
Owtt,e,¢_ Manual 13