Goldstar WG1000R Owner's Manual page 15

installation
9. A_ach each Frame Curtain the window sash
using screws, (Type C).(See Figure 6)
: DO NOT DRILL A HOLE IN THE
BO_'OM PAN, The unit is designed t,o operate
with approximately 1/2" of water in bottom pan,
Ty_ C
10. Sllide the unit into the cabinet.(See Figure 7)
• For security purpose, reinstall
_rews(Type A) at cabinet's sides,
Screw(Type A)
. Power Cord
1i1,0Cut the Foam-Strip to the proper length
and inse_ betw_n the upper window sash
and the Ilower window sash.
(See Figure 8}
Foam Strp
12. Attach the Window Locking Bracket with
a Ty_ C screw. (S_ Figure 9)
Window Locki_ng Bracket
13,.,Attach the front grille to the cabinet by
inserting the tabs on the ,grille into the tabs
on the front of the cabinet. Push the grille
in until it snaps into place. (See Figure 10)
14,.,Lift the inliet griiie and s_ure, it with a Type,
A screw through the front grille,
(See Figure 11)
15,. Wirtdow lrts'_llaitloty of room
air conditto_r
is _w completed. _ ELECTRICAL DATA
for attaching _wer cord to e_trical outlet.
Figure il
Own'e,y_ Manual 15