Goldstar WG1000R Owner's Manual page 21

Mamte,na,nce and Servic_
i, If you want to pull out the filter upward,
open the inlet grille slightly. Turn inside
out the front grille,.
Disassemble the in_et grille from the, front
grille with separating the hing_ part by
inserting a '_' type screw-driver tip_
Rotate the inlet grille i80 degrees and
insert the h_ks into the lower holes of
front grille.
Then, insert the filter. (See Figure12, t3)
Figure 12
2.Attach the front grille to the cabinet by
inserting the tabs on the grille into tlhe tabs
on the front of the cabinet. Push the grille in
until it snaps into p_a_. (See Fi,gurei4)
Figu_ 14
3i, Lift the inlet grille and s_ure it: with a type
A s_ew through the front grille.
(See Figure 15)
4...If you want to pull out the fiilter downward,
use the reversible inlet grille without
(The grille is already assembled for that
way,.)
Figure i5
Owners Manual 21