LG BX580 Owner's Manual page 86

Appendix 87
% If the [HDMI] or [Digital Output (SPDIF)]
option is set to [DTSre-encode], tile audio
output is limited to 48 kHz and 5.1Ch.If tile
[HDMI] or [Digital Output (SPDIF)] o ption is
set to [DTSre-encode], the DTS Re-encode
audio is outputted for BD-ROMdiscs,and
the original audio is outputted for the other
discs(like [Primary Pass-Thru]).
If [HDMI] option is set to [PCM Multi-CH]
and [Digital Output (SPDIF)]option is set to
[Primary Pass-Thru] w hile playback Dolby
Digital PlusorTrueHD audio, DIGITAL AUDIO
OUT is limited to"PCM 2ch't
If tile HDMI connection is version 1.3
and Dolby Digital Plus/DolbyTrueHD is
outputted from HDMI OUTjack, DIGITAL
AUDIOOUTjack is limited to"PCM 2ch"
(When tile HDMI and DIGITALAUDIOOUT
areconnected simultaneously).
Tile audio is outputted as PCM48 kHz/1:6
bit for MP3/WMA file and PCM44.1kHz/16
bit for Audio CD while playback.
The DolbyTrueHD audio recorded on some
Blu-raydiscs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITALAUDIOOUT jacks and "DD
"displays on tile screen ifTrueHD audio is
not output (for example, when [HDMI] is set
to [PCMStereo] and [Digital Output (SPDIF)]
is set to [Primary Pass-Thru]).
You must select a digital audio output
and a maximum sampling frequency that
your Amplifier (or AV receiver) accepts
using [Digital Output (SPDIF)],[HDMI] and
[Sampling Freq.]options on the [Setup]
menu (see page 29-30).
With digital audio corlrlection (DIGITAL
AUDIOOUT or HDMI),Disc Menu button
sounds of BD-ROMmay not be heard if the
[Digital Output (SPDIF)]or [HDMI] option is
set to [Primary Pass-Thru].
If tile audio format of the digital output
does not match the capabilities of your
receiver,the receiver will produce a strong,
distorted sound or no sound at all.
Multi-channel Digital Surround Sound via
digital connection carl only be obtained
if your receiver is equipped with a Digital
Multi-channel decoder.
®
x