LG BX580 Owner's Manual page 78

Appendix 79
Controlling a TV with
the Supplied Remote
Control
You carl control your TV using the buttons
below.
By pressing You can
(TV POWER) Turn tile TV on or off.
Switch the TV's input
AV/INPUT source between the TV
and other input sources.
Scanup or down
PR/CHA/V through memorized
channels.
VOL +/- Adjust the volume of
theTV
Setting up the remote to
control your TV
You carl operate your TVwith tile supplied
remote control.
If yourTV is listed in tile table below, set tile
appropriate manufacturer code.
1. While holding down _ (TV POWER) b utton,
and pressthe manufacturer code for your
TV with the numerical buttons (seetile
table below).
Manufacturer Code Number
LG 1(Default),2
Zenith 1,3,4
GoldStar 1,2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release tile _ (TV POWER) button to
complete setting.
Depending on yourTV, some or all buttons
may not function on theTV, even after
entering tile correct manufacturer code. When
you replace tile batteries of tile remote, tile
code number you have set may be reset to
tile default setting. Set the appropriate code
number again.
>
®
x