LG BX580 Owner's Manual page 22

Installation
23
2. Tile [Corlrlection Setting] menu appear on
the screen.UseA/V to select [Wireless] and
press ENTER ((_)).
3. Select [Yes] and press ENTER ((_)) to
continue. Tile new connection settings
reset tile current network settings.
4. Tile player scanstile all available access
points or wireless routers within range and
display them asa list. Use A/V to select an
accesspoint or wireless router on tile list,
and then pressENTER (_)).
If you have security on your access point
or wireless router, verify that the WEPor
S°
[Manual] - Your access point may not
be broadcasting its accesspoint name
(SSID). C heck your router settings through
your computer and either set your router
to broadcast SSID, o r manually enter the
access point name (SSID)in[Manual].
[Push Button] -If your access point or
wireless router that supports the Push
Button Configuration method, select this
option and presstile PushButton on your
access point or wireless router within 120
counts. Youdo not need to know tile access
point name (SSID)and security code of your
access point or wireless router.
UseA/V/</> to select the IPmode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
F
0
WPAkey that was entered into the player
matches the router's information exactly.
You need to input the security code as
necessary.
6. Select [OK] and pressENTER ((_) to apply
network settings.