LG BX580 Owner's Manual page 54

Operation 55
Entering a network user ID and the
password
Depending on your PC'serwironment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2°
UseA/V/</> to select a character then
pressENTER (®) to confirm your selection
on the keyboard menu.
To enter a letter with an accent mark, select
the letter from extended character set.
Example:Select"D"and then pressINFO/
DISPLAY ([])) to display the extended
character set. Use</> to select"D"or"D"
and then press ENTER ((_)).
PC requirements
Windows_° XP(Service Pack2 or higher),
Windows Vista* (no Service Packrequired)
Windows 7* (no Service Packrequired)
1.2 GHz InteP Pentiumc°IIIor AMD
Sempron
TM
2200+ processors
Network environment: 100 Mb Ethemet,
WLAN (IEEE 802.11b/g/n)
[Clear] - Clear all entered characters.
[Space] - Inserts a spaceat tile cursor
position.
[<-] - Deletes tile previous character at the
cursor position.
[ABC / abc / #+-=&] - Change tile keyboard
menu settings to capital letters, small letters
or symbols.
3. When you finish entering tile network user
ID and password, select [OK] using A/V/</
> and pressENTER ((_))to accessthe folder.
Tile network user ID and password will
be remembered after accssing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (R) colored button
to un-tick the [Remember] check box
before accessing the folder.
O
@
O