LG BX580 Owner's Manual page 65

66
Operation
0
©
©
Using the virtual keyboard
On the virtual keyboard, there are two input
mode for the entering a character. Pressthe
yellow (Y) colored button to toggle display
between keyboard mode and keypad mode.
Keyboard Mode
UseA/V/</> to select a letter on the screen,
and press ENTERto confirm your selection.
[Space]
- Inserts a space at the cursor
position.
[Backspace] - Deletes the previous character
at the cursor position.
[ABC / abe / #+-=&] - Changes the virtual
keyboard settings to capital letters, small
letters or symbols.
Press CLEAR to clear all entered characters.
To enter a letter with an accent mark:
I. Selecta letter using AIVI<I> on the virtual
key board.
2. PressINFO/DISPLAY ([])) to display the
extended character set.
3. Use</> to select a character then press
ENTER.
Available languages to enter on the keyboard
mode are asfollows: English,Spanish, Italian,
French,German, Dutch, Portuguese, Swedish,
Polishand Czech.
Keypad Mode
This mode allows you to enter letters by
pressing the buttons on tile remote control.
Pressthe buttons with the required letter once,
twice, three or four times until the letter is
displayed.
[Cancel]
- Returns to tile previous screen.
CLEAR
REPEAT
Deletes tile previous character
at the cursor position.
Inserts a space at tile cursor
position.