Installeroverview - LG 22LG3DCH Owner's Manual

COMMERCIAL MODE SETUP
INSTALLEROVERVIEW
Operating Installer Menu
To set up the controls for the TV you will need to know how to
enter the TV Installer menu and make changes to the default val-
ues. If necessary, familiarize yourself with the TV Installer menu
and how to make and save changes to the items in the menu.
LG Installer Remote
You will need an LG Installer remote control similar to the
one shown to the right. The installer remote must have a "Source"
button or its equivalent. The remote shown for reference in this
manual has "INPUT" -- this button serves the purpose of a Source
button.
f
mO • _ • k _ _ ki k
Typical Installer Menu
The TV's clonable features need to be set up. This is a critical
step. If the Master TV display panel's clonable features like added
channel icons or channel labels are not done correctly, then the
cloned TVs will all have problems. Refer to the TV menus for
other TV features: Picture, Audio, Option, Closed captions, Lock
(V-Chip), etc.
TLL-1 100A Clone Programmer
TV Unk
Loade,-Domo
5
TLL11OOA
The TLL-1100A is a very simple cloner to use. It
can be set up to clone a master TV setup and
transfer it into a target TV. Cloning is possible
using MPI protocol. Be sure the Master TV is
set up completely. Cloning is only possible
when the signal source is an AnaJog channel,
not a digital channel. Refer to TLL-1100A
instruction manual supplied with the cloner.
INPUT MODE
G
Q_G
EZ PIC EZ SOUND SWAP INFO
0000
CC _ RATIO
Ex,© OsAP
© @®
@ @@
© @@
@ @@
N
0
I'rl
N
0
I-I-I
I-I-I
--4
C
91