Table of Contents
Advertisement
Programming
The
Remote
Control
The Universal
Remote
Control can be programmed
to
operate
many
manufacturers'
components
using
the
component
function buttons for VCR, DVD, AUX, RCVR,
DTV
CABLE
or
DBS.
Follow
the
procedures
for
programming your Remote Control with or without a code
for the component.
Default Modes for Remote Control
Ib,[_.LvJ IO['
TV
DTV-STB
CABLE
DBS
'
DBS (Preset)
VCR
'
VCR (Preset)
DVD/CD
DVD and CD (Preset)
Ally
Personal Video Recorders,
..A
.
Tape and VCR2
RCVR
Audio receiver (Preset)
Note:
Determine the manufacturer
of the component
and look
in the table for the code (found en page 16 and 17).
Procedure
1.
Confirm that the external component
is plugged in and
operating.
2.
Turn the component off.
ACTION
3.
Press
and
_
together
for
at least
5
seconds.
After
5
seconds,
the
illuminated
mode
(component)
buttons will begin to flash. Release
the
ACTION and POWER buttons.
4.
Press appropriate
component
button on the Remote
Control: VCR,
DVD (CD),
AUX
(VCR2
or TAPE),
RCVR,
DTV, CABLE
or DBS. The component
button
will illuminate steadily and all others will go out.
5.
Enter the 3-digit component
code using the Remote
Control numeric keypad (0 - 9 buttons). The component
button will blink twice.
6.
Press
the
Remote
Control
_
to
test
the
component.
If the
procedure
was
successful,
the
component
will turn on and the component
key will blink
twice and then go out.
Note:
If the component
does not operate
with the Remote
Control, repeat the steps 3 through 6 using another code
(some brands have multiple codes). If an incorrect code
is entered,
or if the procedure
takes longer than 30
seconds, the programming
will fail.
TV (Panasonic Only)
Panasonic TV Code
DTV (Panasonic Only)
Panasonic DTV Code
C.......
_
Panasonic CABLE
A_L_ t_'reseD
.
Code
Panasonic DBS Code
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal
Video Recorder Code
Penasonic RCVR code
REMOTE
CONTROL
OPERATION
Programming
Without
A Code
This
procedure
searches
all
codes
and
is called
the
"sequence
method."
1.
Confirm that the external component
is plugged in and
on,
2.
Turn the component off.
ACTION
3.
Press
and
_
together,
for at least 5
seconds.
After
5 seconds,
the
illuminated
mode
(component)
buttons will begin to flash. Release
the
ACTION and POWER buttons.
4.
Press the appropriate component
button on the Remote
Control. The component
button will illuminate steadily
and all others will go out.
5.
Press the _
button to set the remote control to the
step and set mode.
6.
Point the remote control towards the component.
7.
Press VOL i_ (the mode key will blink three times), then
the Remote Control
_
button to test the
press
component.
Continue this process until the proper code
is found. If the procedure was successful, the component
will turn on.
Note:
Each time you press the VOL I_ button, make sure that the
component key blinks twice before pressing the POWER
button.
ACTION
8.
Once the device responds,
press
to store the
code. The mode (component) button will blink twice.
Note:
It may take many
attempts before
the correct
code
is found. If you miss a code, press •
VOL
then press
the _
button te test the component
Component
Codes
The Universal
Remote
Control is capable
of operating
many component
brands
after entering
a code. Some
components
may not operate because the codes are not
available
due to limited memory. The Universal
Remote
Control does not control all features found in each model.
VCR
DVD
DVD (CD)
AUX (VCR2)
AUX (TAPE)
RECEIVER
DTV
CABLE
DBS
15e
Hide quick links:
Advertisement
Table of Contents
