Fan Speed; Temperature Setting - LG LP090HSD-Y8 Owner's Manual

Control Locations
The controls will look like one of the following.
--FAN SPEED
• Every time you push this button, it cycles through the settings as follows:
{High(F2) , Low(F1) , High(F2) _ Low(F1)}
POWER
• To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other button.
- Pushthisbuttonto cyclethroughthemodesfromCOOL * FAN
• HEAT * COOL.
- COOL
• Fan runs continually for normal cooling operation.
- ENERGY SAVER
• The fanstopswhenthe compressor s topscooling.
Approximately every3 minutesthefan willturn on andthe unit
will checkthe roomair temperature to determineif coolingis
needed.
- FAN
• Fan operation without heating or cooling.
- HEAT
• Fan runs continually for normal heating operation.
TEMPERATURESETTING
• Use this button to automatically control the
temperature of the room.
The temperature can be set within a range of
54o F to 86° F by increments of 2 ° F.
• The setting appears in the display.
-TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature setting will raise 2 ° F after 30 minutes, and once again
after another 30 minutes.
• Push Timer to cycle through the settings from 1 Hour * 2 Hours * ... _ 12 Hours maximum.
14 Room Air Conditioner