Table of Contents
Advertisement
I With a DSS Receiver
I
You can:
1)
Record and view any channel including
scrambled channels; channel selection
must be made at the DSS Receiver.
IN FROM
CABLE or Antenna
DSS
2)
Program one channel for unattended
recording.
NOTE:
The DSS receiver must be turned off to view
programs from a cable box or antenna. See the
DSS manual for details.
IN FROM
Satellite Dish
IN FROM ANT.
**DSS ® is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
OUT TO TV
VHF_HF
TV
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your
VCR to them to receive a higher quality picture and sound. If your TV is not
stereo, you can connect a stereo amplifier to the VCR to enjoy stereo sound.
I
Audio/Video
Connections
I
.
(_
AUDIO IN
OUT TO1V
--
II
F
1
Connect the VIDEO OUT terminal on the
VCR to the VIDEO IN terminal of your TV.
2 Connect the =L" and "R" AUDIO OUT terminals on the VCR to the "L" and =R" AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver)
to "VIDEO."
NOTE:
To use your "IVas a VCR monitor, s et the VIDEO/'rv selector on the TV (Monitor/Receiver) t o =VIDEO."
Use the L AudioIn jack for propersoundreproduction whenconnecting to a monauralTV.
I Stereo Amplifier
Connections
When you connect your VCR to a Stereo
Component System, you can view the
picture from the VCR while enjoying
stereo from your audio system.
Conr_ct the "L" and "R" AUDIO OUT
terminals on the VCR to the "L" and "R"
AUDIO IN terminals of your stereo.
Stereo Amplifier
VCR
Note to CABLE systeminstaller:.
_
Thisreminderis provided to callthe CABLEsysteminstaller's attentionto Article820-40 of the NEC in USA (and to the
CanadianElectricalCode in Canada) that provides guidelinesfor propergrounding and, in particular, s pecifiesthat the
cablegroundshallbeconnectedtothe grounding systemof the building, a s closeto the pointof cableentryas practical.
9
Advertisement
Table of Contents
