Panasonic Omnivision PV-8455S Operating Instructions Manual page 25

I_PCheck list before you begin.
[] Clock is set to correct time.
IiIltlI _ll]_gr_
4
a
d
.2
3.
b.
C
Time Stamp Feature
2
Press AIF to select =SET UP
FEATURE," and then press • to
display the =SET UP FEATURE" screen.
For about the first 10 seconds of each recording, the VCR automaUcally writes
the following program data on the tape: Date, Start time, Scheduled stop time
(for Timer Rec. only), Channel No. and Category (for Timer Rec. only). Then,
if playback is started at the starting point of the recording, this information will
be displayed about 7 seconds after playback begins for a few seconds.
.. - ........ MENU ...... -°_;_|_"
1
Press ACTION to display the menu. _ Ii
SET CLOCK I
SET UP CHANNEL I
ID IOMA/LANGUE: ENGL I SH I
SELECT:• • KEY |
SET :1_ KEY I
END :ACTION KEY J
3
Press • to select =ON" or "OFF."
• When =OFF"is selected,the programdatais
writtenon the tape, butwill notbe displayed
for the first5 secondsof playback.
---. SE'_ UD_ J FEA'f_;_ .... I
SET :_- KEY
END :ACTION KEY
4
Press ACTION twice to exit.
<Time Stamp Example>
Normal/
One Touch Recording
12128/1998 _
12: OOPM
CH 08 ABC
Timer Recording When Clock is not set...
12/2811998 MON | --I--/ ....
12:00PM -- I:00PM I --:
CH 08 ABC SPORTS CH 08 ABC
• If the tape speed is changed immediately after recording begins,
the display may be incorrect.
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid blue
screen when the broadcast signal is very weak or nonexistenL
a
Press ACTION to display the menu.
b
Press AV to select =SET UP
VCR," and then press • to
_lisplay the =SET UP VCR" screen.
C Press AV to select =NOISY CH
BLUE BACK," and then press •
to select =ON" or =OFF."
• When =ON" is selected, a solid blue screen
appears whenever the signal is weak or
MENU
m
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
I D I OMA/LANGUE: ENGL I SH
SELECT: •
SET :, YKE K EY
END :ACTION KEY
SETUP VCR ..... L I
REPEAT PLAY : ON |
tlltiblmm= I
SELECT:• • KEY I
SET :_ KEY I
END :ACTION KEY _''" J
nonexistent. When "OFF" is selected, the .picture
is displayed regardless of the signal condition.
• The picture can not always be seen clearly when "OFF" is selected.
d
Press ACTION twice to exit.
25