Table of Contents
Advertisement
[ 1/412000 TUE 12:00PM
DST : ON
SEl-r
ING
:
CH
02
AUTO
CLOCK
SET
COMPLETED
END
: PUSH CH UP KEY
If the displayed time is correct, press CH • to exit.
• This concludes one time VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the VCR
may have recognized the PBS channel (setting channel)
in the wrong time zone. Please do the following to
correct the situation.
a Make a note ofthe SETTING:CH numbershownon-
screen and pressCH • to exit.
b Delete thesettingchannelfrom the VCR channel
memory.(See "To Addor Delete a Channel"
sectionon page 14.)
c PressACTION to displaythe menu.
d Press•Y to select=SETCLOCK," and then
press• to display the "SET CLOCK" screen.
e Press •Y
to select =AUTO CLOCK SET," and then
press • to display the =CLOCK AUTO SET" screen.
Press CH • to start Clock Auto Set.
• If you use a cable box and have multiple PBS
stations, tune the cable box to a different PBS
station and try auto clock set using themenu.
ACTION
SELECT/SET
&V'4 I_)
keys
_NNEL UP
I
AUTO CLOCK SET
I
I S I NCOMPLETE
I
F_
_.-'TION
TO SET CLOCKJ
If the CASE2 screen "AUTO CLOCK SET IS
INCOMPLETE" appears, auto clock set is not
available in your area. Please set the clock
manually as described below.
a PressACTION to displaythe
SET CLOCK screen.
b PressAVand••to
-- -
select and set the month,
date, year, time, and
D_'I'. (Daylight Saving Time).
DST:ON
SELECT:A
•
KEY
SET
:1_ KEY
END
:ACTION
To Make Corrections,
repeatedly press • • to move the cursor
to the incorrect entry and make the correction.
c Pr_s ACTION twiceto st_qG
the clock and exitthis mode.
ISET
:,_ > KEY
_, START
:ACTION
KEY
IMPORTANT
NOTE FOR AUTO
CLOCK
SET WHEN
USING
CABLE
BOX OR DSS RECEIVER
• Autoclockset willbe performedwhen
the VCR isturnedoffthe first timeeach
day. Ifyou use a cable box and yoo
wantautoclockset to be 15erformed, the
cablebox mustbe lefton and tunedto
the PBS channelbeforethe VCR power
is turnedoff.
• Ifyou use a DSS receiver,it mustbe
tumedoff for autoclockset.
• If you useAudioNideoJack connection
betweenthe VCR and Cable Boxor
DSS receiver,you mustalso connect-
the RF coaxialcable in orderto use the
autoclockse.L_nd channelauto set
features.
13
Advertisement
Table of Contents
