Table of Contents
Advertisement
Cop Tin Your Tapes
(Dubbing)
Connections
you'll need to make.
• When connecting to a normal VCR, use the L Audio In jack for proper sound reproduction.
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
_Audio Out (R)_
1
Insert a pre-recorded
tape into the Playing
(Source) VCR.
2
Insert a blank tape with
record tab into the
Recording
(Editing) VCR.
t
3
Select "LINE" Input mode on the
Recording (Editing) VCR. (See "Selecting
the Input Mode" at right.)
4
Press PLAY on the Playing VCR,
Press PAUSE at the desired starting point.
5
Press REC on the Recording VCR, and then
press PAUSE immediately thereafter.
6
Press PAUSE on both VCRs at the sa_ne
time, to begin copying.
To Edit Out Unwanted Parts
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
7
Press STOP on both VCRs to stop copying.
To Monitor
Dubbing
on Your TV
1 Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/TV Selector on the Recording
VCR to =VCR."
Selecting
the Input Mode
Press INPUT.
The display will change in the order below.
_.--_ Channel
Number-----_
LINE---_
or
Press CH &JV.
The display will change in the order below.
_ULIN 1-2-3
6('1_9)_
(CABLE)
E<----
125 or
€
• When LINE is selected, "L" is displayed in the Multi
Function Display for about 4 seconds.
Caution:
Unauthorized exc'-'hanging and/or
copying of copyrighted recordings
may be copyrightinfringement.
27
Advertisement
Table of Contents
