Panasonic Omnivision PV-8455S Operating Instructions Manual page 23

Important for Program Index Search:
Timer recordings must be
recorded back to back in order for
them to be placed on the Program
Index list. If a timer recording is
followed by a function, such as
REW or PLAY, the data is lost.
STOP/EJECT
d
REWIND FAST FORWARD
C C
Program Index Search
(For timer recordings only)
This feature allowsyou to choose a timer recorded program from a
Program Index list and then start a search for that program.
Once the tape is ejected or normal recording is started, all program
Index data are deleted.
SELECT SEARCH MO_
":_'_':_
....
1
Press INDEX to display the "SELECT
SEARCH MODE" screen.
2
Press AV to select =PROGRAM
INDEX SEARCH," and then press •
to display the =PROGRAM INDEX"
screen.
3
Press AV to select the desired
recorded program, and then
press • to start the forward or
rewind search.
• When the designated program is reached,
the VCR automatically goes into Playback
mode.
INDEX
DATE START CATEGORY CH
11 4 12:30P MOVIE NBC
1/ 4 8:00P COMEDY CBC
1/ 7 3:00P I/A_IC NSC
SELECT: • • KEY
SEARCH :)" KEY
END : INOEX KEY
INDEX SEARCH
d
EWlND
C
_ FAST
FORWARD
C
Index Scan
(For normal and/or timer recordings)
This feature allows you to scan (forward or reverse
each recording for 10 seconds in Playback mode.
a
Press INDEX to display the
"SELECT SEARCH MODE" screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
SELECT SEARCH MOOE
SELECT:& • KEY
SET :1_ KEY
END : INDEX KEY
b
Press AV to select "INDEX
SEARCH," and then press •
to display the =INDEX" screen.
C Press nEW or FF to begin the scan.
As each index mark is reached,
a short playback will be performed
after which FF or nEW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
INOEX
FF
J
AUTO INDEX SEARCH
1
_STOP
Start here
• _- Play (for about 10 seconds) i
.... _ -:_ F .a_s!..F o_a_. Pr..R.e.__nd. ...... J
23