Easy Edit Standby; Manual Easy Editing - Panasonic Palmcorder IQ PV-IQ404 Operating Instructions Manual

_OWER Switch_
!
!
2
If you stop recording but plan to resume
within 24 hours, use the Edit Standby
feature to make a smooth transition
between scenes.
Set the POWER switch to OFF while in
Record/Pause mode and leave the
cassette in the Palmcorder.
Set the POWER switch to CAMERA and
press RECORD/PAUSE (within 24 hours)
to continue recording.
Note:
• If it is longer than 24 hours before you
resume recording, use the manual Easy
Edit feature described below.
• To extend battery life, remove battery from
Palmcorder when not in use.
For proper continuity when taping from the
Stop mode, or after charging the Battery
Pack.
POWER
OFF
VCR CAMERA
Set the POWER switch to VCR.
Press REWIND to go back a
few seconds on the tape.
Then, press PLAY to review
the picture on the Viewfinder.
Now, press STILL at the
locationyou wish to continue
your recording.
POWER
OFF
3
VCR CAMERA
Set the POWER switch to CAMERA.
Your Palmcorder will go into the Record/
Pause mode,
Press RECORD/PAUSE to continue
recording.
17