8-Function Remote Control; Removing And Storing The Remote; Remote Control Operation; Replace The Battery - Panasonic Palmcorder IQ PV-IQ404 Operating Instructions Manual

Operate the major functions of your Palmcorder
from up to 16 feet (5 m) (approx.) away.
To remove,
press in on the Remote itself and release.
The Remote ejects for removal.
To store
into the slot, as shown by the arrow, until it
locks into place.
Remote Control
Signal
REPLACE BATTERY
WITH PANASONIC PART
NO. VSBW0004 (CR2025)
ONLY. USE OF
ANOTHER BATI'ERY
MAY PRESENT A RISK
OF FIRE OR EXPLOSION.
CAUTION-BATTERY MAY
EXPLODE IF
MISTREATED. DISPOSE
OF USED BA'FrERY
PROMPTLY. KEEP AWAY
FROM CHILDREN.
DO NOT RECHARGE,
DISASSEMBLE OR
DISPOSE OF IN FIRE.
Aim at the Remote Sensor and press the
desired buttons.
VCR CAMERA
Controlled Functions MODE MODE
REC/PAUSE - o
T(telephoto) Zoom - o
W(wide angle) Zoom - o
PLAY o -
FF/SEARCH o -
REW/SEARCH o -
STOP o -
STILL o -
• After 5 minutes in the Rec/Pause mode,
the Palmcorder will go into the Standby
mode (power will shut off) to conserve
battery life.
In this case, press REC/PAUSE down
for about one second, the Palmcorder
comes back on and goes into the
Record mode.
1 _While pinching the stopper tab,
® pull the Battery Tray out.
2
Insert the battery (supplied) into the
Battery Tray with the Q mark facing
down.
Do not reverse the polarity_.
Replace the Battery Tray.
18