Table of Contents
Advertisement
Remove the Battery Compartment lid
and insert the AA size battery (supplied).
• Make sure polarities are aligned properly.
• When tape loading and unloading time
becomes longer than normal, battery
replacement is necessary.
2
3
1
Turn the Tape Wheel on the
cassette in the direction of the arrow to
take up any slack before placing the
cassette in the PlayPak.
Slide the RELEASE button to open the
PlayPak door.
3
Insert the _
cassette with the
window facing up and to the left.
Then, snap the lid shut.
• Let the Load Detector fully retract before
using the PlayPak in your standard VHS
VCR.
• Be sure the cassette reel area under the
PlayPak is free to turn while loading.
Slide the RELEASE button and wait for
lid to open.
Hold the PlayPak securely in one hand.
Then push the cassette out through the
hole in the bottom of the PlayPak with your
finger and remove.
20
Hide quick links:
Advertisement
Table of Contents
