Easy Edit Stand-By; Manual Easy Editing - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Camera Recording
UE OR A PRES at ASEO Oe DR 2
SARE ATT OS: SE Ue E
Easy Edit Stand-by. * Before you begin...
* Connect Camcorder to power source.
* Insert cassette with record tab (page 15).
For a smooth transition between scenes if
recording is stopped, and then started within
24 hours.
1 Press RECORD/PAUSE to stop
recording.
2 Set POWER to OFF and leave
cassette in Camcorder.
3 To resume recording, set POWER
to CAMERA.
4 Press RECORD/PAUSE to resume
recording.
Note:
* Use Manual Easy Edit (below) if more than
24 hours before recording is resumed.
Manual Easy Editing - Before you begin...
For proper continuity when taping from Stop ° Connect Camcorder to power source.
mode or after attaching a new Battery. * Insert cassette with record tab (page 15).
1 Set POWER to VCR.
2 @ Press REWIND/SEARCH to
rewind a few seconds of tape.
9 Press PLAY to review recording.
© Press STILL where you want to
continue recording.
3 Set POWER to CAMERA.
4 Press RECORD/PAUSE to resume
recording.
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts @ panasonic.com