Operation Principle Andrepair Method Oficemaker - LG LRTPC1831W User Manual

7. OPERATION PRINCIPLE ANDREPAIR METHOD OFICEMAKER
This manual describes function of models adhering Ice Maker,
7-1 OPERATION PRINCIPLE
7-%1 Operation principle of Ice Maker
• Keep a level of ice-removing tray with "initial control" inputting
power.
Icing C_
• Wait until when water within ice-removing tray becomes cold
after starting ice-making operation.
Perform "ice check operation" to ensure that ice is filled at an
ice bank by carrying out reverse turning and forward turning
the ice-removing motor. Perform "icing-removing operation for
dropping ices of ice-removing tray from the ice bank If ices
are not fully filled.
• Perform "ice-removing control" after supplying water to the ice-
removing tray by operating solenoid of the ice valve.
• As operation for the assembly line and service of refrigerator,
pressing a "l/Maker Test Switch" allows to operate in the order
of "initial _ ice-removing _ water supply" control step.
1. Turning the ice-making stop switch off stops ice-making function of the ice-maker and thus no ice is made.
2. Ice-making function stops at the time of selecting ice-making function and release of the ice-making function allows to
perform the initial control function again.
* Make sure the switch on the ice maker assy is turned "on".
-16-