Table of Contents
Advertisement
7. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER
7-1 OPERATION PRINCIPLE
7-1-1 Operation Principle of Icemaker
Power Input
Initial Control
Icemaking
Control
Ice Ejection
Control
Water supply control
TEST Control
1. Turning the Icemaker stop switch off (O) stops the icemaking function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
• Adjusts Ejector to Start Position with power on.
• Waits until water in the TRAY is frozen after Icemaker
Starts operation.
• Runs MOTOR to drop ice from the tray into the ICE BIN.
• Performs Icemaking Mode after supplying water by operating
the SOLENOID in ICE VALVE.
• To operate LINE and SERVICE, press and hold the Fill Key
for 3 seconds. The icemaking will run through 3 stages:
Harvest
Icemaker
Fill
Icemaking.
Power Switch
Feeler Arm
- 26 -
Advertisement
Table of Contents
